Your shopping cart is currently empty.
Burn Barrier™ 20-20
BURN BARRIER™ 20-20 FLAT LATEX INTUMESCENT
FIRE RETARDANT PAINT CLASS A
Product Description:
BURN BARRIER™ 20-20 is a latex (water base) intumescent fire retardant paint, manufactured
and tested in accordance with Federal Specification TT-P-001932. This product is
designed for use on interior surfaces where it is either necessary or desirous to reduce
the surface burning characteristics of the substrate. It dries quickly to a flat matte finish,
having the appearance of a conventional flat paint. In the presence of heat or flame, the coating
puffs up (intumesces) and forms a thick sponge like cellular foam layer, this foam layer
insulates the substrate reducing the penetration of heat, thus retarding the flame spread and
prolonging structural collapse.
Fire Tests:
Flame Spread Ratings: Class "A". When tested in accordance with ASTM E-84 (NFPA 255)
the coating obtained the following fire hazard classification. A complete Underwriters
Laboratory report is available below for download.
FIRE HAZARD CLASSIFICATION:
Surface Preparation:
All surface preparation should be carried out in accordance with good painting practices.
Remove all loose peeling or powdery paint from the surface. All dirt, grease, oil, wax and
other foreign matter MUST be removed with a detergent, rinse surface thoroughly with clear
water and allow to dry. Repair all cracks, holes, and other surface irregularities. Allow to dry,
sand lightly and prime repaired surface. All glossy or smooth surfaces should be dulled
with sandpaper. For best appearance, new wood surfaces should be sealed with BURN
BARRIER™ 3001 Alkyd Prime.
Tinting:
Available in white, off-white and pastel shades, or may be field tinted with most universal tinting
colorants. Tinting colorants should not exceed two fluid ounces per gallon.
Packaging
Standard packaging, 1 gallon, 5 gallon and 55 gallon containers.
PRECAUTIONS:
CAUTION! Do not take internally. Close container after each use. KEEP OUT OF REACH OF
CHILDREN. Protect from freezing.
Information provided herein is based on tests believed to be reliable. Inasmuch as Fire Retardants
Inc. has no control over the use or application to which others may put this material, we make no
guarantee or warranty. Our products are sold on the condition that each user of the material make
their own evaluation to determine the material's suitability for their own particular use.
© Fire Retardants Inc. All Rights Reserved.
FIRE RETARDANT PAINT CLASS A
Product Description:
BURN BARRIER™ 20-20 is a latex (water base) intumescent fire retardant paint, manufactured
and tested in accordance with Federal Specification TT-P-001932. This product is
designed for use on interior surfaces where it is either necessary or desirous to reduce
the surface burning characteristics of the substrate. It dries quickly to a flat matte finish,
having the appearance of a conventional flat paint. In the presence of heat or flame, the coating
puffs up (intumesces) and forms a thick sponge like cellular foam layer, this foam layer
insulates the substrate reducing the penetration of heat, thus retarding the flame spread and
prolonging structural collapse.
Fire Tests:
Flame Spread Ratings: Class "A". When tested in accordance with ASTM E-84 (NFPA 255)
the coating obtained the following fire hazard classification. A complete Underwriters
Laboratory report is available below for download.
FIRE HAZARD CLASSIFICATION:
| Surface | Douglas Fir |
| Flame Spread Rating | 25 |
| Fuel Contributed | 15 |
| Smoke Developed | 20 |
| Number of preliminary coats | None |
| Rate per coat: | |
| sq.ft./gal. U.S. (Imp) | 230 (275) |
| Number of Overcoats | None |
Surface Preparation:
All surface preparation should be carried out in accordance with good painting practices.
Remove all loose peeling or powdery paint from the surface. All dirt, grease, oil, wax and
other foreign matter MUST be removed with a detergent, rinse surface thoroughly with clear
water and allow to dry. Repair all cracks, holes, and other surface irregularities. Allow to dry,
sand lightly and prime repaired surface. All glossy or smooth surfaces should be dulled
with sandpaper. For best appearance, new wood surfaces should be sealed with BURN
BARRIER™ 3001 Alkyd Prime.
Tinting:
Available in white, off-white and pastel shades, or may be field tinted with most universal tinting
colorants. Tinting colorants should not exceed two fluid ounces per gallon.
Packaging
Standard packaging, 1 gallon, 5 gallon and 55 gallon containers.
PRECAUTIONS:
CAUTION! Do not take internally. Close container after each use. KEEP OUT OF REACH OF
CHILDREN. Protect from freezing.
Information provided herein is based on tests believed to be reliable. Inasmuch as Fire Retardants
Inc. has no control over the use or application to which others may put this material, we make no
guarantee or warranty. Our products are sold on the condition that each user of the material make
their own evaluation to determine the material's suitability for their own particular use.
© Fire Retardants Inc. All Rights Reserved.
SPECIAL OFFER: FREE SHIPPING
US Sales Only
Note: Products shipped ground, for other options please call.
Customer Reviews
